We finally did it, SC solid steering rack bushings for the driver's side  post mounts.

Easy to install, these tapered bushings hold the rack in position under load.  Perfect for drift cars that have modified knuckles.

Driver Side
The first of a series of solid bushing kits, these alumium bushings press fit into the steering rack and eliminate any squirm in the steering. These are two sided with a press-fit side and a spacer side.

Driver Side Specs:

• 6061 aluminum, machined and knurled and now ORANGE anodized.
• 4 tapered half bushings..
• Replaces 2 oem rubber-on-steel collar bushings

Install: These will install without removing the rack but care should be taken to not bend the pressure lines.   knock the old bushings out with a hammer and chisel, air chisel or ball joint press.  Install the new bushings by hand  initiall then final press the last .020" to full seat.  Contact FIGS with questions.